There can’t be two opinions that patio increases the beauty and charm of your yard. Installing patio blocks can consume a lot of time but it is certainly worth the effort. Patio blocks are available in numerous shapes and sizes. The most popular variety is the 16*16 patio block. Special pavers are also available in the market that let you create new designs and border. By using your imagination while laying these blocks, you can create awesome patio. In order to install patio blocks, you need to do the are measurement, build foundation using sand and crushed stone and then place the patio blocks carefully. Cutting of patio blocks might be required depending on the design you have picked. This post explains in detail about installing patio blocks.
Installing the Patio Blocks
The materials required for this installation are crushed stone, patio blocks and sand. Firstly, you will have to measure the area and estimate the number of blocks required. A precaution required during this is to leave some space for edging on both sides. Thereafter, you will have to dig for putting all the materials. The final thickness here depends on the thickness of the Angels Camp block being used. Some of the blocks are only 1 inch while majority of the blocks are about 2 inch in thickness. Then, you have to put crushed stone first followed by sand. While filling these two materials, you need to create grades with the help of shovel. Thereafter, you have to put the blocks gently. If you are using designer blocks, place them accordingly. Finally, pour some sand so that it can take the empty space between block cracks. One thing you should check before starting the project is the weather forecast. The whole project can take few days and make sure that it is not affected by rain. Again, sloping has to be considered while choosing the place for patio. If you make the patio on lower level, water can aggravate on it resulting in damage.
Cutting the Patio Blocks
Cutting of patio blocks might be required during the project especially if you want curved cuts in the design. The choice of tools for this purpose depend on how many patio blocks you have to cut and the number of curves desired. If you want to add curves only at few places, a basic saw is sufficient. However, if want to introduce a number of curves, it is better to go for gas-powered cutoff saw. The choice of blade also depends on the amount of work to be done. If you have to cut numerous patio blocks, you should go for diamond blade. Otherwise, masonary blade is sufficient. You should first make the mark on the block with the pencil Just follow that mark while cutting the block. Most of the pavers can be cut with single attempt. However, if it too thick you should first cut it halfway. You should follow all the safety measures as mentioned on instruction manuals of the tools used.by